Reflection Probes with Small Tips

For some medical and semiconductor applications, a (very) small tip is desirable to do reflectance measurements. Avantes offers two standard diameters of small tip reflection probes, 1.5 and 2.5 mm and each tip is normally 100 mm long.

The probe is configured with an illumination leg with six 200 μm fiber cables which connects to a fiber coupled light source and a single 200 μm read fiber cable to measure the reflection via connection to a spectrometer.

A special angled fiber holder (AFH-15) is available for the 1.5 mm diameter reflection probe. This device enables reflection measurements under angles of 15, 30, 45, 60, 75 and 90 degrees.

blz 94 reflection probes with small tip

Fibers	7 fibers 200 µm core, 6 light-fibers, 1 read fiber, N.A.= 0,22. Standard 2m length, splitting point in the middle.
Wavelength range	200-2500 nm (UV/VIS/NIR)
Connectors	SMA905 connectors (2x)
Probe end	Stainless steel cylinder, 100 mm long x 1,5 or 2,5 mm diameter.
Jacketing	The optical fibers are protected by a Kevlar reinforced PTFE jacket with PVC sleeving. OD: 3.8 mm
Temperature	-20ºC to 65ºC.
Bending	Minimum bend radius: Short term (few seconds) 20 mm, long term: 120 mm

FCR-7UVIR200-2-1.5x100	Reflection probe, 1.5 mm tip, UV/VIS, 7 x 200 µm fibers, 100 mm long, 2 m length, SMA
FCR-7UVIR200-2-2.5x100	Reflection probe, 2.5 mm tip, UV/VIS, 7 x 200 µm fibers, 100 mm long, 2 m length, SMA